DS-2CD4135FWD-IZ
3MP Smart IP Indoor Dome Camera
• 1/2.8” Progressive Scan CMOS
• 3MP @45fps frame rate
• Slow shutter
• 120dB WDR
• 3D DNR
• Audio/Alarm IO
• Support 128G on-board storage
• DC12V/PoE
Camera |
Image Sensor: |
|
1/2.8″ Progressive Scan CMOS |
Min. Illumination: |
|
0.005 Lux @(F1.2,AGC ON), 0.007 Lux @(F1.4,AGC ON), 0 Lux with IR |
Shutter time: |
|
1 s to 1/100,000 s |
Slow shutter: |
|
Support |
Lens: |
|
2.8-12mm @ F1.4, 94.5°~30.5°/Φ14 |
Auto Iris: |
|
DC drive |
Adjustment Range: |
|
Pan:0° – 355°, Tilt: 0° – 75°, Rotation: 0° – 355° |
Day& Night: |
|
IR cut filter with auto switch |
Wide Dynamic Range: |
|
120 dB |
Compression Standard |
Video Compression: |
|
H.264+/H.264/MJPEG |
H.264 code profile: |
|
Baseline Profile / Main Profile / High Profile |
Video bit rate: |
|
32Kbps~16Mbps |
Audio Compression: |
|
G.711/G.722.1/G.726/MP2L2 |
Audio bit rate: |
|
64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2) |
Image |
Max. Image Resolution: |
|
2048×1536 |
Sub Stream: |
|
50Hz: 45fps(2048 × 1536), 50fps@(1920 × 1080, 1280 x 720)
60Hz: 45fps(2048 × 1536), 60fps@(1920 × 1080, 1280 x 720) |
Third Stream: |
|
Independent with Main Stream and Sub Stream, up to
50/60Hz: 10fps@1280 ×720 |
Image Enhancement: |
|
BLC/HLC/3D DNR/ROI/Defog |
Image Settings: |
|
Saturation, brightness, contrast adjustable through client software or web browser |
Distortion Correction: |
|
Support |
Target Cropping: |
|
Support |
Picture Overlay: |
|
LOGO picture can be overlaid on video with 128×128 24bit bmp format |
Day/Night Switch: |
|
Auto/Schedule/Triggered by Alarm In |
Network |
Network Storage: |
|
NAS (Support NFS,SMB/CIFS), ANR |
Alarm Trigger: |
|
Motion detection, tampering alarm, network disconnect , IP address conflict, storage exception |
Protocols: |
|
TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
General Function: |
|
User Authentication, Watermark, IP address filtering |
System Compatibility: |
|
ONVIF (Profile S, Profile G),ISAPI |
Interface |
Audio: |
|
1-ch 3.5 mm audio in (Mic in/Line in)/out interface |
Communication Interface: |
|
1 RJ45 10M/100M/1000M Ethernet port, 1 RS-485 interface |
Alarm: |
|
1 input, 1 output (up to DC24V 1A or AC110V 500mA) |
Video Output: |
|
1Vp-p Composite Output (75 Ω, BNC) |
On-board storage: |
|
Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
Reset Button: |
|
Yes |
Audio |
Environment Noise Filtering: |
|
Support |
Audio I/O: |
|
Support dual audio track, stereo |
Audio Sampling Rate: |
|
16kHz / 32kHz / 44.1kHz / 48kHz |
Smart Feature-set |
Behavior Analysis: |
|
Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal |
Line Crossing Detection: |
|
Cross a pre-defined virtual line |
Intrusion Detection: |
|
Enter and loiter in a pre-defined virtual region |
Region Entrance: |
|
Enter a pre-defined virtual region from the outside place |
Region Exiting: |
|
Exit from a pre-defined virtual region |
Unattended Baggage: |
|
Objects left over in the pre-defined region such as the baggage, purse, dangerous materials |
Object Removal: |
|
Objects removed from the pre-defined region, such as the exhibits on display. |
Exception Detections: |
|
Scene change detection, Sudden audio increase/decrease detection, Audio loss detection, Defocus detection |
Recognition: |
|
Face detection recognition |
Statistics: |
|
Object Counting (Entrance and Exit object number is accounted and showed on screen in real time) |
General |
Operating Conditions: |
|
-30 °C ~ 60 °C (-22 °F ~ 140 °F)
Humidity 95% or less (non-condensing) |
Power Supply: |
|
12 VDC ± 10%, PoE (802.3af) |
Power Consumption: |
|
Max. 6~9W (IR lens 2W, Motorized lens 1 W) |
Impact Protection: |
|
IK10 |
IR Range: |
|
Up to 30m |
Dimensions: |
|
Φ 140 × 121.8 mm (Φ 5.51” × 4.80”) |
Weight: |
|
1400 g (3.09 lbs) |