DS-2CD4125FWD-IZ
2MP Smart IP Indoor Dome Camera
-
- 1/2.8” Progressive Scan CMOS
- 1080p @ 60fps frame rate
- High light environment
- Slow shutter
- 140dB WDR
- 3D DNR
- Audio/Alarm IO
- Support 128G on-board storage
- DC12V/PoE(802.3af)
Camera Image Sensor: 1/2.8″ Progressive Scan CMOS Min. Illumination: 0.005 Lux @ (F1.2, AGC ON), 0 lux with IR
0.007 Lux @ (F1.4, AGC ON), 0 lux with IRShutter time: 1s ~ 1/100,000s Slow shutter: Support Lens: 2.8-12mm @ F1.4, angle of view: 113-33.8° Lens Mount: φ14 Auto Iris: DC drive Adjustment Range: Pan: 0°-355°, Tilt: 0°-75°, Rotation: 0°-355° Day& Night: Electronic (-I: IR cut filter with auto switch) Wide Dynamic Range: 140dB Compression Standard Video Compression: H.264+/H.264/MJPEG H.264 code profile: Baseline Profile / Main Profile / High Profile Video bit rate: 32Kbps~16Mbps Audio Compression: G.711/G.722.1/G.726/MP2L2 Audio bit rate: 64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2) Triple Streams: Yes Image Max. Image Resolution: 1920 x 1080 Frame Rate: 50Hz: 50fps (1920 × 1080)/(1280 × 960)/(1280 × 720)
60Hz: 60fps (1920 × 1080)/(1280 × 960)/(1280 × 720)Third Stream: Independent with Main Stream and Sub Stream, up to
50/60Hz: 20fps(1280 × 720)Image Enhancement: BLC/HLC/3D DNR/ROI/Defog Image Settings: Saturation, brightness, contrast adjustable through client software or web browser Distortion Correction: Support Target Cropping: Support Picture Overlay: LOGO picture can be overlaid on video with 128×128 24bit bmp format Day/Night Switch: Auto/Schedule/Triggered by Alarm In Network Network Storage: NAS (Support NFS,SMB/CIFS), ANR Alarm Trigger: Motion detection, tampering alarm, network disconnect , IP address conflict, storage exception Protocols: TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour General Function: User Authentication, Watermark, IP address filtering System Compatibility: ONVIF (Profile S, Profile G),ISAPI Interface Audio: 1-ch 3.5 mm audio in (Mic in/Line in)/out interface Communication Interface: 1 RJ45 10M/100M/1000M Ethernet port, 1 RS-485 interface Alarm: 1 input, 1 output (up to DC24V 1A or AC110V 500mA ) Alarm Input: 1 Alarm Output: 1 Video Output: 1Vp-p Composite Output (75 Ω, BNC) On-board storage: Built-in Micro SD/SDHC/SDXC slot, up to 128 GB Reset Button: Yes Audio Environment Noise Filtering: Support Audio I/O: Support dual audio track, stereo Audio Sampling Rate: 16kHz / 32kHz / 44.1kHz / 48kHz Smart Feature-set Behavior Analysis: Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal Line Crossing Detection: Cross a pre-defined virtual line Intrusion Detection: Enter and loiter in a pre-defined virtual region Region Entrance: Enter a pre-defined virtual region from the outside place Region Exiting: Exit from a pre-defined virtual region Unattended Baggage: Objects left over in the pre-defined region such as the baggage, purse, dangerous materials Object Removal: Objects removed from the pre-defined region, such as the exhibits on display. Exception Detections: Scene change detection, Sudden audio increase/decrease detection, Audio loss detection, Defocus detection Recognition: Face detection recognition Statistics: Object Counting (Entrance and Exit object number is accounted and showed on screen in real time) General Operating Conditions: -30 °C ~ 60 °C (-22 °F ~ 140 °F)
Humidity 95% or less (non-condensing)Power Supply: 12 VDC ± 10%, PoE (802.3af) Power Consumption: Max. 6 W (Max. 9W, IR: 2W, motorized VF lens: 1W) Impact Protection: IK10 IR Range: Up to 30m Dimensions: Φ 140 × 121.8 mm (Φ 5.51” × 4.80”) Weight: 1400 g (3.09 lbs)
