• ioLogik E1241
  • ioLogik E1214

ioLogik E1240

  • User-definable Modbus/TCP Slave addressing
  • Supports EtherNet/IP* adapter mode
  • Supports RESTful API for IIoT applications
  • 2-port Ethernet switch for daisy-chain topologies
  • Save time and wiring cost with peer-to-peer communications
  • Active communications with MX-AOPC UA Server
  • Supports SNMPv1/v2c
  • Easy mass deployment and configuration with ioSearch utility
  • Friendly configuration via web browser
  • Simplify I/O management with MXIO library on either a Windows  Linux platform
  • Class I Division 2, ATEX Zone 2 certification
  • Wide operating temperature range: -40 to 75°C (-40 to 167°F)
    *Requires online registration (available free of charge)

Description

• ioLogik E1240 Specifications
• Inputs and Outputs
Analog Inputs 8 channels
Isolation 3k VDC  2k Vrms
• Analog Input
Type Differential input
Resolution 16 bits
I/O Mode Voltage / Current (jumper selectable)
Input Range 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA (burnout detection)
Accuracy ±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C
Sampling Rate • All channels: 12 samples/sec
• Per channel: 1.5 samples/sec
• Only one channel enabled: 12 samples/sec
Input Impedance 10 mega-ohms (min.)
Built-in Resistor for Current Input 120 ohms
• Power Requirements
Input Voltage 12 to 36 VDC
Input Current 121 mA @ 24 VDC
• MTBF (mean time between failures)
Time 474,053 hrs
Standard Telcordia SR332
• Common Specifications
• LAN
Ethernet 2 switched 10/100 Mbps RJ45 ports
Protection 1.5 kV magnetic isolation
Protocols Modbus/TCP (Slave), EtherNet/IP*, SNMPv1/v2c, RESTful API, TCP/IP, UDP, DHCP, BOOTP, HTTP
• Physical Characteristics
Wiring I/O cable max. 14 AWG
Dimensions 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight Under 200 g (0.44 lb)
Mounting DIN rail  wall
• Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Altitude Up to 2000 m
Note Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Standards and Certifications
Safety UL 508
EMC EN 55032, EN 55024, EN 61000-3-2/3-3, EN 61000-6-2/6-4
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Hazardous Location Class 1 Division 2, ATEX Zone 2
Green Product RoHS, CRoHS, WEEE
Note: Please check Moxa’s website for the most up-to-date certification status.
• Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty
Note: Because of the limited lifetime of power relays, products that use this component are covered by a 2-year warranty.
×